00353 1 465 9010   00353 1 465 9011
Follow Us on:
field verification plate for ductester
field verification plate for ductester

Field Verification Plate for DucTester

Retrotec’s Field Verification Plate for duct testing systems gives you an easy, five minute test to verify the accuracy of your duct testing system. Performing this test monthly will allow you to detect calibration problems early and fix them before they become serious.

The DucTester Field Verification Plate gives you the means to check your system calibration in the field, to make sure it is performing at top accuracy. The plate has a nozzle to connect a pressure reference, and is meant to be attached to the end of the flex duct. Knowing the size of the hole in the plate, the tester can run the fan, and measure the hole flow. Comparing the result will indicate if the system is within parameters, and can give an indication when the system may need to be sent back to the factory for formal re-calibration.

The DucTester Quickguide and Manual include a section on using the field verification plate to check the system.

Features
  • Sturdy metal construction
  • Nozzle connected to a pressure pickup to ensure even pressure reference during the test

 

Your Name (required)

Your Email (required)

Your Telephone Number (optional)

Subject

Your Message

Security Code
captcha