00353 1 465 9010   00353 1 465 9011
Follow Us on:

HT8100 TRMS process calibrator

HT8100 is a professional meter performing measurements as TRMS DMM as well as process calibrator generating 0-20mA and 4-20mA DC current signals. As DMM the instrument carries out  AC/DC/AC+DC voltage measurements up to 1000V and AC/DC/AC+DC current measurements up to 1A. Under the current generation mode  you can manually select between 0-20mA and 4-20mA as well as automatic ramps on output signal.  It is capable of measuring also current absorbed by external transducers simulating a current adjustable within the whole measuring range. The instrument can store measurement results into an internal memory and is designed in compliance with safety standards IEC/EN61010-1 according to CAT III 1000V and CAT IV 600V with double insulation protection.  Each function can be selected through corresponding keys. This instrument is typically applicable in the automation field






  • DC/AC TRMS Voltage
  • DC/AC TRMS Current
  • AC+DC measurements
  • Generation of output current signal up to 24mA DC
  • Selection 0-20mA and 4-20mA output
  • Up to 4 available automatic ramp
  • Loop current measurement of external transducers
  • 250Ohm HART feature
  • Simulating of external transducers
  • Resistance and continuity test
  • Diode test
  • Frequency
  • Data HOLD
  • Manual/Autorange
  • Relative measurements
  • Autotest for automatic detection of AC or DC parameters
  • Autobacklight
  • Internal memory
  • Auto Power OFF

Codmetel : HV008100

  • Test leads
  • Couple of alligator clips
  • Belt with magnetic end
  • Protection rubber holster
  • Batteries
  • User manual

EMC 2004/108/CE Directive
IEC/EN 61010-032
IEC/EN 61010-1
LVD 2006/95/CE Directive


Your Name (required)

Your Email (required)

Your Telephone Number (optional)


Your Message

Security Code