RFE » Products http://rfe.ie Reg Farrell Engineering Ltd. Tue, 10 Oct 2017 13:41:34 +0000 en-US hourly 1 http://wordpress.org/?v=4.2.2 Digital sound level meter type2 c/w HT150 http://rfe.ie/product/digital-sound-level-meter-type2cw-ht150/ http://rfe.ie/product/digital-sound-level-meter-type2cw-ht150/#comments Tue, 07 Oct 2014 11:50:18 +0000 http://rfe.ie/?post_type=product&p=328 HT154 is a portable digital sound level meter designed to perform standard inspections on environmental noise, control of soundproofing, noise level etc. The instrument is easy to use thanks to its wide LCD and parameters’ control through 5 keys only. HT154 is supplied with a portable calibrator and is fitted inside a practical carrying case complete with measurement accessories

The post Digital sound level meter type2 c/w HT150 appeared first on RFE.

]]> tech_spec

 

 

 

Function
  • Measurement of sound pressure level (SPL)
  • 0.1dB reading resolution
  • Manual range selection
  • Display of MAX/MIN values
  • Time integration FAST/SLOW
  • Frequency weighting A and C
  • AC and DC analogical outputs
  • Manual calibration with trimmer
  • Input for external power supply
  • Tripod mounting screw
  • Low battery indication
  • Compliance with  IEC 61672 Type 2
Accessories
STANDARD
  • Portable calibrator
  • Windproof protection
  • Screwdriver for manual calibration
  • Jack for AC/DC analogical outputs
  • Batteries
  • User manual
  • Carrying case
Standards

EMC 2004/108/CE Directive
CE MARK
IEC61672 Type 2

The post Digital sound level meter type2 c/w HT150 appeared first on RFE.

]]> http://rfe.ie/product/digital-sound-level-meter-type2cw-ht150/feed/ 0 HA000138 Lamp tester for gas filled lamps http://rfe.ie/product/ha000138-lamp-tester-for-gas-filled-lamps/ http://rfe.ie/product/ha000138-lamp-tester-for-gas-filled-lamps/#comments Thu, 09 Oct 2014 14:16:25 +0000 http://rfe.ie/?post_type=product&p=488 HT5 is a practical portable instrument which performs quick tests on low pressure gas lamps and high pressure sodium vapor lamps simply touching the lamp’s surface. Other available features are  AC voltage detector, continuity test and diode test

Function
  • Working test on neon and fluorescent lamps
  • Working test on sodium vapor lamps
  • Working test on halogen lamps
  • AC voltage detector from 60 to 250V, 50/60Hz
  • Continuity test
  • Diode test
  • Led and acoustic indications
  • Built-in torch
  • Safety: IEC/EN61010-1, CAT II 300V

Codmetel : HA000138

Accessories
STANDARD
  • Battery
  • User manual
Standards

EMC 2004/108/CE Directive
CE MARK
LVD 2006/95/CE Directive

The post HA000138 Lamp tester for gas filled lamps appeared first on RFE.

]]> tech_spec

 

 

Codmetel : HA000138

Accessories
STANDARD
  • Battery
  • User manual
Standards

EMC 2004/108/CE Directive
CE MARK
LVD 2006/95/CE Directive

The post HA000138 Lamp tester for gas filled lamps appeared first on RFE.

]]> http://rfe.ie/product/ha000138-lamp-tester-for-gas-filled-lamps/feed/ 0 HT 21 Digital multimeter http://rfe.ie/product/ht-21-digital-multimeter/ http://rfe.ie/product/ht-21-digital-multimeter/#comments Wed, 08 Oct 2014 15:39:33 +0000 http://rfe.ie/?post_type=product&p=463 HT21 model is a compact digital multimeter in complete autorange designed to perform basically voltage AC/DC measurements up to 600V, more than resistance, continuity test, diode test, frequency, capacitance and duty cycle. The meter is in compliance with IEC/EN 61010-1 safety standard with double insulation protection in CAT III 600V. HT210 have a large LCD backlight display and each measurement function can be selected with a rotative selector at 5 positions. Other features are HOLD function and REL for relative measurement. An AutoPowerOff function is integrated to preserve the internal battery after 30 minutes of idleness

The post HT 21 Digital multimeter appeared first on RFE.

]]> tech_spec

 

 

 

Function
  • DC Voltage
  • AC Voltage
  • Resistance and continuity test with buzzer.
  • Diode test
  • Capacitance
  • Frequency
  • Duty cycle
  • Data HOLD
  • Relative mode
  • Autorange
  • Backlight
  • Auto Power OFF

Codmetel : HR000021

Accessories
STANDARD
  • KIT4000A : Couple of test leads with tip 2mm
  • Battery
  • Carrying bag
  • User manual
Standards

EMC 2004/108/CE Directive
CE MARK
LVD 2006/95/CE Directive

The post HT 21 Digital multimeter appeared first on RFE.

]]> http://rfe.ie/product/ht-21-digital-multimeter/feed/ 0 HT 300 http://rfe.ie/product/ht-300/ http://rfe.ie/product/ht-300/#comments Fri, 10 Oct 2014 11:47:52 +0000 http://rfe.ie/?post_type=product&p=532 The model HT300 it’s a compact digital thermometer designed to perform contact, air or liquid temperature measurements with type K/J probes directly connected to it with standard connector. The instrument measures temperature both in °C and °F and can compensate possible error of external probes. The Data HOLD, MAX/MIN/AVG, the relative measurement and a Auto Power OFF features are also available with the meter

Function
  • Temperature measurement in °C/°F by means of K/J type probes
  • Maximum, minimum and average (AVG) values
  • Relative measurement
  • Data HOLD
  • Offset adjustment for compensation of external probes
  • Auto Power OFF

The post HT 300 appeared first on RFE.

]]> tech_spec

 

 

 

Accessories
STANDARD
  • TK101 : Type K bead probe
  • Carrying bag
  • Battery
  • User manual
OPTIONAL
  • TK107 : Type K probe for air/gas temperature
  • TK108 : Type K probe for semi-solid substances temperature
  • TK109 : Type K probe for liquid temperature
  • TK110 : Type K probe for surface temperature
  • TK111 : Type K probe for surface temp. with 90 degree tip
Standards

EMC 2004/108/CE Directive
CE MARK

The post HT 300 appeared first on RFE.

]]> http://rfe.ie/product/ht-300/feed/ 0 HT 5000 CABLE TRACER http://rfe.ie/product/professional-system-for-finding-grounding-cables-pipes/ http://rfe.ie/product/professional-system-for-finding-grounding-cables-pipes/#comments Tue, 07 Oct 2014 11:47:54 +0000 http://rfe.ie/?post_type=product&p=326 Description: Professional System for Finding grounding cables & Pipes
Version: HT ITALIA
Price on Application

Function
  • Inductive coupling with 33kHz signal by integrated antenna
  • Direct coupling with 33kHz by external accessories
  • Selectable transmitted power of signal
  • Blinking or continuous signals
  • Level battery indication
  • Passive mode without transmitter
  • Active mode with transmitter
  • Automatic measurement of depth
  • Manual/Automatic sensitivity selection
  • Display backlight
  • Speaker with volume control
  • Headphone jack for use in loud environment
  • Floor cap for housing protection

 

The post HT 5000 CABLE TRACER appeared first on RFE.

]]> tech_spec

 

 

 

Function
  • Inductive coupling with 33kHz signal by integrated antenna
  • Direct coupling with 33kHz by external accessories
  • Selectable transmitted power of signal
  • Blinking or continuous signals
  • Level battery indication
  • Passive mode without transmitter
  • Active mode with transmitter
  • Automatic measurement of depth
  • Manual/Automatic sensitivity selection
  • Display backlight
  • Speaker with volume control
  • Headphone jack for use in loud environment
  • Floor cap for housing protection
Accessories
STANDARD
  • TX5000 : Transmitter for HT-5000
  • RX5000 : Receiver for HT-5000
  • Cable banana-alligator clip, 2m, 2 pcs
  • Cable banana-alligator clip, 10m
  • Metal probe
  • Batteries
  • Carrying bag
  • User manual
OPTIONAL
  • 820005314 : Clamp for inductive coupling, 100mm diameter
  • 890008852 : Set cables (shuko, RJ11, coax) for HT-5000
  • GOK50-R :
Standards

EMC 2004/108/CE Directive
CE MARK
LVD 2006/95/CE Directive

The post HT 5000 CABLE TRACER appeared first on RFE.

]]> http://rfe.ie/product/professional-system-for-finding-grounding-cables-pipes/feed/ 0 HT 7011 MULTI METER PROBE http://rfe.ie/product/ht-7011-multi-meter-probe/ http://rfe.ie/product/ht-7011-multi-meter-probe/#comments Thu, 09 Oct 2014 14:36:04 +0000 http://rfe.ie/?post_type=product&p=492 HT701 model is a TRMS professional multimeter designed to perform basically AC/DC voltage measurements up to 1000V, AC/DC current measurement up to 400mA more than resistance, continuity test, diode test, frequency, capacitance, and temperature with type K probes as sub-features.
This TRMS multimeter can be used also as insulation tester with test voltage selectable up to 1000VDC and have a internal memory for saving data. The HT701 is designed in compliance with IEC/EN 61010-1 safety standard with double insulation protection in CAT IV 600V and CAT III 1000V. The model have a LCD display with bargraph and the Auto-backlit feature for automatic enable of backlight depending on the environment darkness conditions. Other features are HOLD function, MAX/MIN/AVG functions and Auto Power OFF feature is integrated to preserve the internal battery after 20 minutes of idleness

The post HT 7011 MULTI METER PROBE appeared first on RFE.

]]> tech_spec

 

 

Function
  • DC Voltage
  • AC TRMS Voltage
  • DC Current
  • AC TRMS Current
  • Insulation resistance with test voltage 50,100,250,500VDC
  • Resistance
  • Continuity test
  • Diode test
  • Capacitance
  • Frequency
  • Temperature with type K probes
  • Data HOLD
  • MIN/MAX/AVG
  • Manual/Autorange
  • Relative measurements
  • Autotest for automatic detection of AC or DC parameters
  • Bargraph
  • Autobacklight
  • Intermal memory
  • Fuse protection on inputs
  • Auto Power OFF

Codmetel : HR000701

Accessories
STANDARD
  • 4413-2 : Couple of test leads
  • Couple of alligator clips
  • Probe for insulation measurement
  • Adapter for type K probes
  • Belt with magnetic end
  • Protection rubber holster
  • TK101 : Type K bead probe
  • Batteries
  • User manual
OPTIONAL
  • TK107 : Type K probe for air/gas temperature
  • TK108 : Type K probe for semi-solid substances temperature
  • TK109 : Type K probe for liquid temperature
  • TK110 : Type K probe for surface temperature
  • TK111 : Type K probe for surface temp. with 90 degree tip
Standards

EMC 2004/108/CE Directive
CE MARK
IEC/EN 61010-1
IEC/EN61557-1
IEC/EN61557-2
LVD 2006/95/CE Directive

The post HT 7011 MULTI METER PROBE appeared first on RFE.

]]> http://rfe.ie/product/ht-7011-multi-meter-probe/feed/ 0 HT 9012 Digital AC Clamp 600A 2000 points CAT IV http://rfe.ie/product/ht-9012-digital-ac-clamp-600a-2000-points-cat-iv/ http://rfe.ie/product/ht-9012-digital-ac-clamp-600a-2000-points-cat-iv/#comments Thu, 09 Oct 2014 15:15:04 +0000 http://rfe.ie/?post_type=product&p=502 HT9012 professional clamp is designed for AC current measurement up to 600A, and DC/AC voltage for achieve safety CAT IV 600V according to IEC/EN61010-1 safety standard. The model have a LCD display with backlight to more easy reading in critical environments. The model perform also resistance and continuity test measurements. The AutopowerOFF feature is also available for this AC clamp meter in order to preserve it’s internal battery charge

The post HT 9012 Digital AC Clamp 600A 2000 points CAT IV appeared first on RFE.

]]> tech_spec

 

 

 

Function
  • AC current up to 600A
  • DC/AC voltage up to 1000V
  • “Voltsense” feature for AC voltage detection
  • Resistance
  • Continuity test with buzzer
  • Manual/Autorange
  • Data HOLD
  • MAX
  • Backlight
  • AutoPowerOFF

Codmetel : HP009012

Accessories
STANDARD
  • 4413-2 : Couple of test leads
  • Battery
  • Carrying bag
  • User manual
Standards

EMC 2004/108/CE Directive
CE MARK
LVD 2006/95/CE Directive

 

The post HT 9012 Digital AC Clamp 600A 2000 points CAT IV appeared first on RFE.

]]> http://rfe.ie/product/ht-9012-digital-ac-clamp-600a-2000-points-cat-iv/feed/ 0 HT I-V 400 PHOTOVOLTAIC INSTALLATION TESTERS http://rfe.ie/product/ht-i-v-400-photovoltaic-installation-testers/ http://rfe.ie/product/ht-i-v-400-photovoltaic-installation-testers/#comments Fri, 10 Oct 2014 13:00:47 +0000 http://rfe.ie/?post_type=product&p=535 The IV curve tracer HT IV 400 is the ideal solution for the ordinary and scheduled maintenance of photovoltaic systems. With The IV curve tracer HT IV 400, searching for possible failures and problems in systems is extremely rapid, efficient and intuitive. The IV curve tracer HT IV 400 carries out the field measurement of the IV characteristic and of the main characteristic parameters both of a single module and of module strings. The instrument measures, together with the IV characteristic of the device being tested, also the values of its temperature and incident irradiation.

The acquired data are then processed to extrapolate the IV characteristic at standard test conditions (STC) in order to proceed with the comparison with the nominal data declared by the modules’ manufacturer, thus immediately determining whether or not the string or the module being tested respects the characteristics declared by the manufacturer. Output current or voltage from the module or string is measured with the 4-terminal method, which allows extending the measurement cables without requiring any compensation for their resistance, thus always providing accurate and precise measures.

The post HT I-V 400 PHOTOVOLTAIC INSTALLATION TESTERS appeared first on RFE.

]]> tech_spec

 

 

In its internal memory, IV 400 manages a database of photovoltaic modules, which can be updated at any time both via the management software and directly on the instrument. Together with the measurement of the IV characteristic and the extrapolation of the characteristic at standard test conditions, IV 400 compares the obtained values with the values declared by the manufacturer, immediately providing the OK / NO result of the test. The operator must not do any calculation, nor any difficult operation. The instrument carries out the comparison rapidly and automatically

STANDARD
  • SOLAR-02 : Remote unit for irradiance/temperature
  • KITGSC4 : Set 4 cables + 4 alligator clips
  • KITPVMC3 : Set of 2 adapters MC3 compliance
  • KITPVMC4 : Set of 2 adapters MC4 compliance
  • Alligator clip black, 4 pcs
  • HT4004N : Transducer clamp 10-100A DC
  • HT4005K : Transducer clamp for AC current up to 200A
  • HT304N : Reference cell for radiation measurements
  • PT300N : PT1000 probe for cell temperature measurement
  • M304 : Mechanical inclinometer
  • TOPVIEW2006 : Windows software + optical/USB cable C2006
  • BORSA2051 : Soft carrying bag
  • ISO9000 calibration certificate
  • User manual on CD-ROM
  • Quick reference guide
512-youtube-icon_64_80e106b48b

Video

OPTIONAL
  • Alligator clip black, 4 pcs
  • HT96U : Rigid clamp 1-100-1000A AC, diameter 54mm
  • HT97U : Rigid clamp 10-100-1000A AC, diameter 54mm
  • HTFLEX33D : Flex clamp 3000A AC, only for use with MPP300
  • HT98U : Rigid clamp 1000A DC, diameter 50mm
  • HT4004P : Rigid clamp 10-100A, only for use with MPP300
  • HP30D1 : Rigid clamp with wide jaws up to 1000A DC
  • SP-0400 : Set of straps for use of meter on neck
  • KITPVEXT25M : Set 2 4mm banana cables, Green/Black, 25m lenght
  • 606-IECN : Connector with magnetic test lead
  • VA400 : Rigid carrying case
  • ACON3F4M : Adapter for connection of DC clamps to MPP300
Standards

EMC 2004/108/CE Directive
CE MARK
IEC/EN60891
IEC/EN61187
LVD 2006/95/CE Directive

The post HT I-V 400 PHOTOVOLTAIC INSTALLATION TESTERS appeared first on RFE.

]]> http://rfe.ie/product/ht-i-v-400-photovoltaic-installation-testers/feed/ 0 HT ITALIA 7051 Digital 5kV Insulation Meter http://rfe.ie/product/hv007051-digital-5kv-insulation-meter/ http://rfe.ie/product/hv007051-digital-5kv-insulation-meter/#comments Tue, 07 Oct 2014 12:00:05 +0000 http://rfe.ie/?post_type=product&p=336 Description: HV007051 Digital 5kV Insulation Meter
Version: HT ITALIA
Price on Application

The post HT ITALIA 7051 Digital 5kV Insulation Meter appeared first on RFE.

]]> The post HT ITALIA 7051 Digital 5kV Insulation Meter appeared first on RFE.

]]> http://rfe.ie/product/hv007051-digital-5kv-insulation-meter/feed/ 0 HT italia INFRARED THERMOMETER HT3301 http://rfe.ie/product/ht-italia-infrared-thermometer-ht3301/ http://rfe.ie/product/ht-italia-infrared-thermometer-ht3301/#comments Thu, 09 Oct 2014 13:48:47 +0000 http://rfe.ie/?post_type=product&p=482 HT3301 digital thermometer is a professional meter for temperature measurements of any objects in very user-friendly mode thanks to the ergonomic “gun” shape with use of infrared rays bunch directed with accuracy by a laser pointer. For effect of reflection of rays, the instrument convert result in °C or °F degree, without direct contact with object. The HT3301 model also performing temperature measurement with external type K probe, available in different options depending on solid, liquid or air environment and HOLD function to freeze result on display, MAX and MIN measurements and a programming threshold values on measurement above it there is an alarm buzzer activation are available. Model have a large LCD display with backlight to more easy reading in critical environments. The Auto Power OFF function preserve the internal battery when instrument don’t work

The post HT italia INFRARED THERMOMETER HT3301 appeared first on RFE.

]]> tech_spec

 

 

 

Function
  • Infrared temperature measurement from –50°C to 1050 °C
  • Emissivity regulation
  • Distance / Spot ratio of  30:1
  • Laser pointer activation
  • Selection between °C/°F unit
  • Measurement with type K probe
  • Setting alarm on measurement
  • Data HOLD, MAX/MIN/DIF/AVG features
  • Internal memory
  • Data HOLD
  • Backlight
  • Auto Power OFF

Codmetel : HA003301

Accessories
STANDARD
  • TK101 : Type K bead probe
  • Carrying bag
  • Battery
  • User manual
OPTIONAL
  • TK107 : Type K probe for air/gas temperature
  • TK108 : Type K probe for semi-solid substances temperature
  • TK109 : Type K probe for liquid temperature
  • TK110 : Type K probe for surface temperature
  • TK111 : Type K probe for surface temp. with 90 degree tip
Standards

EMC 2004/108/CE Directive
CE MARK

The post HT italia INFRARED THERMOMETER HT3301 appeared first on RFE.

]]> http://rfe.ie/product/ht-italia-infrared-thermometer-ht3301/feed/ 0