RFE » Products http://rfe.ie Reg Farrell Engineering Ltd. Tue, 10 Oct 2017 13:41:34 +0000 en-US hourly 1 http://wordpress.org/?v=4.2.2 9010/9020 Controller http://rfe.ie/product/90109020-controller/ http://rfe.ie/product/90109020-controller/#comments Wed, 21 Jan 2015 12:05:13 +0000 http://rfe.ie/?post_type=product&p=4861 Advanced design and innovative features make the 9010 and 9020 Controllers the top choice for gas-warning systems, monitoring up to 20 channels. The 9010 Controller operates with one independent sensor, while the 9020 operates with two independent sensors per control module. Each module comes with an independent AC/DC power supply for increased system reliability. Both units feature full internal diagnostics, which minimize false alarms and unexpected down time. The controllers can also power remote sensors, while the large four-digit LCD and LED provide such crucial information as gas concentration, alarm status and more. A convenient RS-485 serial interface offers handy printer connection to make a record of data, while a customized transmission protocol Modbus RTU can record serial bus data transmission such as system configuration, gas concentration, alarm and failure events.

Features & Benefits

  • 9010/9020 controllers monitor up to 20 channels
  • Control modules come with independent AC/DC power supply
  • Large four-digit LCD and LED provide gas concentration, alarm status, time-out function and more
  • Convenient serial interface offers printer connection, while Modbus RTU can record serial bus data transmission

The post 9010/9020 Controller appeared first on RFE.

]]> tech_spec

 

 

 

Applications

  • Combustible Detection
  • Toxic Detection
  • Oxygen Detection

Approvals & Certifications

The post 9010/9020 Controller appeared first on RFE.

]]> http://rfe.ie/product/90109020-controller/feed/ 0 ALTAIR 2X Gas Detector http://rfe.ie/product/4892/ http://rfe.ie/product/4892/#comments Thu, 22 Jan 2015 09:46:56 +0000 http://rfe.ie/?post_type=product&p=4892 All ALTAIR 2X Gas Detectors

  • Incorporate proven XCell® sensor technology
  • Enhance worker safety, compliance and traceability
  • Minimize cost of ownership
  • Demonstrate rugged durability

The post ALTAIR 2X Gas Detector appeared first on RFE.

]]> tech_spec

 

 

 

 

Features & Benefits

Low cost of ownership

  • Fastest sensor response times, lowest calibration gas flow rate on the market
  • > 4-year expected sensor life
  • 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
  • Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
  • 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

  • Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
  • Bump pass: green LED flash every 15s, large on-screen checkmark
  • Bump fail or expiration: red LED flash every 15s, no checkmark
  • End-of-sensor-life warning and alarm

Full-time traceability

  • Records 75 alarm events
  • 150+ hours of periodic data (ALTAIR 2X and 2XP)
  • 100+ hours of periodic data (ALTAIR 2XT)
  • Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

  • Tough over-molded rubber armor
  • Survives multiple 25-ft drops onto concrete
  • Agency-certified dust- and water-tight IP67 construction
  • Intrinsically-safe design

 

Related Resources

Options & Specifications

  • ALTAIR 2XP Gas Detector with XCell Pulse Technology: H2S
  • ALTAIR 2X Gas Detectors: CO, H2S-LC and SO2
  • ALTAIR 2XT Two-Tox Gas Detector: CO/H2S and SO2/H2S-LC
  • Available in charcoal gray and glow-in-the-dark housing.
  • Contact MSA for alternate or custom setpoints.

Applications

  • Confined Space
  • Toxic Detection

Approvals & Certifications

  • USA/Canada
    • cCSAus Class I Div 1 Groups A, B, C, D
    • Class II Div 1 Groups E, F, G Class III
    • Tamb = -40C to +60C T4
    • USA: UL 913 7th Edition
    • Canada: CSA 22.2 No. 157
  • ATEX: FTZU II 2G Ex ia IIC T4 Gb -40C to +60C
  • IEC/Australia/New Zealand: FTZU Ex ia IIC T4 Gb   -40C to +60C

 

The post ALTAIR 2X Gas Detector appeared first on RFE.

]]> http://rfe.ie/product/4892/feed/ 0 Altair Pro Gas Detector Choose from O2, CO, H2S, NH3, Cl2, ClO2, HCN, NO2, PH3 and SO2 co http://rfe.ie/product/altair-pro-gas-detector-choose-from-o2-co-h2s-nh3-cl2-clo2-hcn-no2-ph3-and-so2-co/ http://rfe.ie/product/altair-pro-gas-detector-choose-from-o2-co-h2s-nh3-cl2-clo2-hcn-no2-ph3-and-so2-co/#comments Fri, 03 Oct 2014 13:57:42 +0000 http://rfe.ie/?post_type=product&p=220 Based on the industry-standard ALTAIR Single-Gas Detector—but with added features and functionality—ALTAIR Pro toxic gas and oxygen detectors combine reliable detection and LED/audible/flashing/vibrating alarms with clear, backlit LCD displays. Electrochemical sensors measure concentrations of toxic gas (ammonia, carbon monoxide, chlorine, chlorine dioxide, hydrogen cyanide, hydrogen sulfide, nitrogen dioxide, phosphine and sulfur dioxide) or percent oxygen. Purpose-built for superior dust and water protection, excellent impact resistance and excellent RFI performance

Features & Benefits

  • Unit detects CO, H2S, O2, NH3, Cl2, ClO2, NO2, SO2, HCN and PH3
  • Gas concentration (ammonia, carbon monoxide, chlorine, chlorine dioxide, hydrogen cyanide, hydrogen sulfide, nitrogen dioxide, phosphine and sulfur dioxide) or percent oxygen displayed on a large, clear, backlit LCD
  • Automatically records the last 50 alarm/test events while simultaneously recording peak gas readings or low O2readings every three minutes in a periodic data log
  • User can read data or change alarm set points by connecting unit to MSA Link via built-in IR communication port
  • Adjustable alarm set points
  • No-miss quad alarm system includes bright flashing LEDs, piercing audible alarm, LCD notification, and an internal vibrating alarm
  • Rubberized armor housing and one-button operation for maximum durability and simplicity
  • Easy alarm check, bump check, fresh air zero, and calibration
  • Easily replaceable batteries and sensors

 

The post Altair Pro Gas Detector Choose from O2, CO, H2S, NH3, Cl2, ClO2, HCN, NO2, PH3 and SO2 co appeared first on RFE.

]]> tech_spec

 

 

 

Description: Altair Pro Gas Detector Choose from O2, CO, H2S, NH3, Cl2, ClO2, HCN, NO2, PH3 and SO2 co
Version: MSA Safety Company
Price on Application

Related Resources

Applications

  • Toxic Detection
  • Oxygen Detection

Approvals & Certifications

The post Altair Pro Gas Detector Choose from O2, CO, H2S, NH3, Cl2, ClO2, HCN, NO2, PH3 and SO2 co appeared first on RFE.

]]> http://rfe.ie/product/altair-pro-gas-detector-choose-from-o2-co-h2s-nh3-cl2-clo2-hcn-no2-ph3-and-so2-co/feed/ 0 Altair Single Gas Detector with sensor options of H2S , CO or O2 http://rfe.ie/product/altair-single-gas-detector-with-sensor-options-of-h2s-co-or-o2/ http://rfe.ie/product/altair-single-gas-detector-with-sensor-options-of-h2s-co-or-o2/#comments Fri, 03 Oct 2014 13:54:51 +0000 http://rfe.ie/?post_type=product&p=219 Description: Altair Single Gas Detector with sensor options of H2S , CO or O2
Version: MSA Safety Company
Price on Application

[caption id="attachment_3867" align="alignleft" width="100"]512-youtube-icon_64_80e106b48b MSA Altair Single Gas Detector[/caption]

 

 

 

 

 

Features & Benefits

  • Sensor options for CO, H2S, and O2
  • Patented electrochemical sensors and MSA-built button sensors
  • Stainless steel and solid electrolyte construction virtually eliminate sensor leakage
  • Automatically records the last 25 alarm/test events and can communicate data by connecting to MSA Link via built-in IR communication port
  • No-miss triple alarm system includes bright flashing LEDs, piercing audible alarm, and an internal vibrating alarm
  • Rubberized armor housing and one-button operation for maximum durability and simplicity

The post Altair Single Gas Detector with sensor options of H2S , CO or O2 appeared first on RFE.

]]> tech_spec

The post Altair Single Gas Detector with sensor options of H2S , CO or O2 appeared first on RFE.

]]> http://rfe.ie/product/altair-single-gas-detector-with-sensor-options-of-h2s-co-or-o2/feed/ 0 ALTAIR® QuickCheck® Station http://rfe.ie/product/altair-quickcheck-station/ http://rfe.ie/product/altair-quickcheck-station/#comments Thu, 22 Jan 2015 10:56:34 +0000 http://rfe.ie/?post_type=product&p=4900 ALTAIR® QuickCheck® Station

The ALTAIR QuickCheck Station uses several tests to make sure ALTAIR and ALTAIR Pro Detectors are fully ready for action. The station administers a bump test to make sure the detector responds to a specified concentration of gas. The station also uses a microphone and electronic check to ensure the detector's audible, visual and vibrating alarms are good to go. With easy-to-understand LEDs, the QuickCheck Station tells a user which test is being administered and whether the detector passed or failed.

[caption id="attachment_3867" align="alignleft" width="100"]512-youtube-icon_64_80e106b48b ALTAIR QUICK CHECK STATION[/caption]

Features & Benefits

  • Fast and easy bump tests
  • Checks visual, audible and vibrating alarms
  • LEDs for tests in progress and pass/fail status
  • Easy-to-see LEDs give simple-to-understand test results
  • Maintenance free
  • Total testing time less than 30 seconds
  • Station is available for all 3 ALTAIR Detector versions (CO, H2S & O2) and for ALTAIR PRO O2, H2S, CO, CO Fire and CO Steel, SO2, NO2, HCN, Cl2 and ClO2 detectors
  • Station comes in manual and automatic version

The post ALTAIR® QuickCheck® Station appeared first on RFE.

]]> tech_spec

 

 Applications

  • Toxic Detection
  • ALTAIR and ALTAIR PRO gas detectors Test

Approvals & Certifications

The post ALTAIR® QuickCheck® Station appeared first on RFE.

]]> http://rfe.ie/product/altair-quickcheck-station/feed/ 0 FlameGard® 5 MSIR Flame Detector http://rfe.ie/product/flamegard-5-msir-flame-detector/ http://rfe.ie/product/flamegard-5-msir-flame-detector/#comments Fri, 10 Oct 2014 15:18:26 +0000 http://rfe.ie/?post_type=product&p=560 MSA's FlameGard® 5 MSIR Detector is an advanced multi-spectrum flame detector designed to provide superior false alarm immunity with the widest field of view. The detector employs a state-of-the-art multi-spectrum infrared (MSIR) sensor array with a sophisticated Neural Network Technology (NNT) system.

The post FlameGard® 5 MSIR Flame Detector appeared first on RFE.

]]> tech_spec

 

 

 

  • Multi-Spectrum IR (MSIR) sensor array provides increased range and a wide field of view
  • Neural Network Technology (NNT) combination is highly immune to false alarms caused by lightning, arc-welding, hot objects, and other sources of radiation.
  • Continuous Optical Path Monitoring (COPM) checks the optical path integrity and the detector’s electronic circuitry
  • Designed to detect typical fires such as those produced by alcohol, n-heptane, gasoline, jet fuels and hydrocarbons, the FlameGard 5 MSIR Detector can see through dense smoke produced by diesel, rubber, plastics, lube oil, and crude oil fires.
  • The FlameGard 5 MSIR Detector is housed in a stainless steel explosion-proof enclosure to provide operational integrity in the harshest environments.
  • Multiple communication outputs provide versatility for use in a variety of applications
  • The serial communication port(s) allows 128 units (247 using repeaters) to be linked up to a host computer using the Modbus RTU protocol.

The post FlameGard® 5 MSIR Flame Detector appeared first on RFE.

]]> http://rfe.ie/product/flamegard-5-msir-flame-detector/feed/ 0 FlameGard® 5 Test Lamp http://rfe.ie/product/flamegard-5-test-lamp/ http://rfe.ie/product/flamegard-5-test-lamp/#comments Wed, 21 Jan 2015 10:29:52 +0000 http://rfe.ie/?post_type=product&p=4848 FlameGard® 5 Test Lamp
 With its high-energy broadband radiation source, the battery-operated FlameGard® 5 Test Lamp is precision-designed to test MSA's FlameGard® 5 MSIR, UV/IR, and UV/IR-H2 Flame Detectors. The rechargeable test lamp provides a radiation source that emits sufficient energy in both the ultraviolet and infrared spectra to activate UV and/or IR flame detectors. A variety of flashing test patterns allow the test lamp to check the operation of MSA flame detectors.

 

The post FlameGard® 5 Test Lamp appeared first on RFE.

]]> tech_spec

 

 

 

Features & Benefits

  • Rechargeable / replaceable battery provides an extended product life
  • Easy grip handle makes the unit easy and comfortable to use
  • Battery charger status indicator simplifies maintenance
  • Explosion proof cast aluminum housing for use in Class I, Divisions 1 & 2, Groups C and D locations

Applications

  • Flame Detection

The post FlameGard® 5 Test Lamp appeared first on RFE.

]]> http://rfe.ie/product/flamegard-5-test-lamp/feed/ 0 FlameGard® 5 UV/IR-E Flame Detector http://rfe.ie/product/flamegard-5-uvir-e-flame-detector/ http://rfe.ie/product/flamegard-5-uvir-e-flame-detector/#comments Wed, 21 Jan 2015 11:17:29 +0000 http://rfe.ie/?post_type=product&p=4854 FlameGard® 5 UV/IR-E Flame Detector

The FlameGard 5 UV/IR E detects fires by monitoring in both the ultraviolet and infrared (UV & IR) spectral ranges making it highly immune to false alarms caused by lightning, arc welding, hot objects and other sources of radiation.
The detector’s electronics are integral within an explosionproof housing, allowing detector information to be processed at the point of detection. The electronics are fully separated from the EEx e wire compartment, offering protection during installation and service.

The post FlameGard® 5 UV/IR-E Flame Detector appeared first on RFE.

]]> tech_spec

 

 

Features & Benefits

  • Wide field of view enables greater coverage for detecting fires utilising fewer detectors
  • LED status indication provides clear visibility from front
  • Continuous Optical Path Monitoring (COPM) checks optical path integrity and detector’s electronic circuitry once every minute
  • Stainless steel construction enables high level of corrosion resistance for Marine environments
  • EEx e wiring compartment eases field wiring connection
  • Five output configurations provide flexibility of choice and economy of purchase

Applications

  • Flame Detection

ATEX/IECEx:
Gas – II 2G Ex d  e IIC T4/T5 Gb
Dust – II 2D Ex tb IIIC T135°C /100 °C Db  IP6X

Complies with EN 54-10

Safety Integrity Level : SIL 3 suitable

FM certified to IEC 61508

HART registered

The post FlameGard® 5 UV/IR-E Flame Detector appeared first on RFE.

]]> http://rfe.ie/product/flamegard-5-uvir-e-flame-detector/feed/ 0 GALAXY® GX2 Automated Test System http://rfe.ie/product/galaxy-gx2-automated-test-system/ http://rfe.ie/product/galaxy-gx2-automated-test-system/#comments Tue, 14 Oct 2014 15:42:02 +0000 http://rfe.ie/?post_type=product&p=715 GALAXY® GX2 Automated Test System
 Simplicity counts with the MSA GALAXY® GX2 Automated Test System for advanced safety management and effortless operation. The GALAXY GX2 Automated Test System provides simple, intelligent testing and calibration of MSA ALTAIR® and ALTAIR PRO Single-Gas Detectors and ALTAIR 4X and ALTAIR 5X Multigas Detectors. Easy-to-use automated test stand offers high performance as either stand-alone unit or integrated portable detector management system, enabling total data access and control of the MSA ALTAIR family Gas Detector fleet. New MSA Link™ Pro Software for proactive safety management; gas exposure email alerts, direct data input, live filtering, test and exposure queries, collecting and printing reports.

[caption id="attachment_3867" align="alignleft" width="100"]512-youtube-icon_64_80e106b48b GALAXY GX2 CALIBRATION KIT[/caption]

The post GALAXY® GX2 Automated Test System appeared first on RFE.

]]> tech_spec

 

 

 

Features & Benefits

  • Color touch screen for ease of setup and viewing
  • Extremely simple to use; testing starts automatically without touching a single button
  • Simultaneous testing of up to ten instruments
  • GALAXY GX2 System is optimized for use with MSA’s XCell® Sensors; provides up to 50% cost of ownership reduction
  • At-a-glance indicators include low calibration gas volume, expiration warnings and test stand status.
  • MSA Link Pro Software provides proactive safety management, dashboard overview and total record-keeping
  • 18 languages available for test stand and MSA Link Pro Software that simplifies usage and reduces training

 

Related Resources

Applications

  • Welding
  • Confined Space
  • Leak Detection

Approvals & Certifications

The post GALAXY® GX2 Automated Test System appeared first on RFE.

]]> http://rfe.ie/product/galaxy-gx2-automated-test-system/feed/ 0 GasGard® XL Controller http://rfe.ie/product/4864/ http://rfe.ie/product/4864/#comments Wed, 21 Jan 2015 12:42:40 +0000 http://rfe.ie/?post_type=product&p=4864 GasGard® XL Controller

Monitor up to eight remote gas sensors with the highly accurate wall-mounted GasGard XL Controller. The sensor's large, multi-language LCD display provides real-time readings, offers full-system diagnosis and shows intuitive icons. Housed in durable, fire-retardant ABS plastic, the controller is suitable for a variety of chemical, industrial and waste water environments. The sensor also features a buzzer that sounds up to 85 db.

The post GasGard® XL Controller appeared first on RFE.

]]> tech_spec

 

 

Applications

  • Combustible Detection
  • Oxygen Detection
  • Toxic Detection

Features & Benefits

  • GasGard XL Controller monitors up to eight remote gas sensors
  • Two levels of alarm per channel and 85 db audible alarm
  • Large multi-language LCD display provides real-time gas readings and full-system diagnosis
  • Convenient upload system allows for event log transfer via ethernet or USB

 

The post GasGard® XL Controller appeared first on RFE.

]]> http://rfe.ie/product/4864/feed/ 0