
BOPLA Bopult electronic enclosure
Plastic console enclosure
An elegant, ergonomic design is what distinguishes these two ABS console enclosures.
BP 810
This enclosure can be used for both consoles and a wire-linked hand-held unit. Especially developed for combining the use of a chip card reader with an input keypad, its design makes it excellent for use as a small control console enclosure.
The front area, recessed by 1 mm, is designed for the flush-fitting of membrane keypads. The front panel – included in the scope of delivery – can be processed separately without any problems and provides adequate space for a wide range of connector designs.
BP 900 F
Ingress protection IP 65 makes this console enclosure especially suitable for use under extreme environmental conditions.
Wall fitting is easy to achieve by means of the break-out keyhole suspension system. Mounting plates and PCBs can be fixed in different positions and levels using self-tapping screws in the mounting bosses.