Description
ICAR HP10 Automatic Power Factors System
Power Factor correction reduces the inductive currents required by loads that impacts the entire electric network, in the generation, transmission, and distribution stages. Power factor correction is therefore an important contribution to the energy efficiency of both the user’s electrical system and the electricity grid.
Generalities:
- Zink-passivated metallic enclosure painted with epossidic dust paint, colour RAL 7035.
- Auxiliary transformer to separate power and auxiliary circuit parts (110V).
- Load-break switch with door interlock.
- Special contactors with damping resistors to limit capacitors inrush current (AC6b).
- FS17 450/750V self-extinguish cable according to EN 50525 – EN 50575 – EN 50575/A1.
- Microprocessor Power Factor Correction relay.
- CRM25 single phase self-healing metallized polypropylene capacitor with UN=415V rated voltage.
*Please refer to the data sheet available for more technical information.
*To use our power factor correction calculator, or send us your utility bills and we will do the calculations for you.
