The Power Tiny Smoke Generator completes the range of the off-mains operated machines perfectly and fills the gap between high flexibility and powerful fog output.
A high-output battery-powered fog machine, it’s used for air flow and air tightness testing – everywhere where fog is needed quickly and efficiently, the Power-Tiny is the perfect alternative to normal fog generators. Extremely reliable – provides 10 minutes of fogging output from a fully charged battery.
The Power-Tiny comes with a battery and battery charger along with a fluid tank and 250 ml of Tiny Fluid, enough fluid for 25 minutes of output. Extra Battery Packs can be purchased and quickly swapped out to instantly provide another 10 minutes of fog power, when you can’t wait for a recharge.
Minimal heat-up time
Due to the heat-up time of only one second the POWER-TINY is ready-to-use on site.
Light weight and small dimensions
The light weight (5.6 kg) and the small dimensions (L=22.3; W=10; H=21 cm) makes the machine useable for mobile uses.
The output of the POWER-TINY can be adjusted with an adjusting knob. The release button is built into the grip. Thus, a comfortable one-hand operation is possible.
The heart of this machine is a microprocessor which controls and supervises all important functions. This guarantees a continuous and safe running of the generator.
250 hours stand-by time
Because of an intelligent control mechanism the battery supplies energy only when necessary. Thus the operation time is considerably increased – the stand-by time is 250 hours.
With one battery 10 minutes of continuous output or up to 150 x 5 seconds bursts can be produced. When the battery is flat it has to be recharged with the supplied charger.
As an option a batterypack is available (battery complete with housing, PCB, fuses and plug). The fog generator can easily be disconnected from the battery and can be connected to the new battery quickly.
Minimal fluid consumption
A special fluid ensures that dense fog is produced with the lowest of fluid consumption.
The POWER-TINY Smoke Generator is equipped with a 3pin-XLR-socket for analog (0 – 10V) control. An XLR-remote as well as a wireless radio remote can be connected (both as an option).
With a DMX-converter (DMXit) the machine can be controlled via DMX 512.
With the optional Timer (TIMEit) a fog and wait time can be programmed in.
- Portable use
- Heat-up time only one second
- Light weight, small dimensions
- Adjustable output
- 250 hours stand-by time
- Continuous output
- Easy handling
- Control via start button or analog (0 – 12V) and with XLR-remote, radio remote, DMX-converter, Timer
- Minimal fluid consumption
- Easy change of the batterypack
- Made in Germany