Description

Kiepe Pull Rope Emergency Stop Switches Hen 211

Kiepe pull-rope emergency stop switches type HEN 211 are used in accordance with the requirements of EN 620 as well as BGI 710 and in conformity with DIN EN ISO 13850 as emergency stop devices as supplementary safety measures on conveyor belt systems. The pull rope is symmetrically tensioned on both sides of the red release lever. The devices are suitable for outdoor use and applications where the ambient temperature varies considerably. With the pull-rope system functionally aligned, the emergency stop signal can be triggered over a distance of up to about 100m for each switch.

Kiepe pull-rope emergency stop switch types HEN 211 comply with Machinery Directive 2006/42/EC and meet the requirements in the safety objectives of Low Voltage Directive 2006/95/EC. The HEN 211 aluminum housing is equipped with two NC-and one NO-Contact. The NO-Contact is connected to a bus module, which watches and signalizes the switching status (in/off) economically over long distances.

Pull rope emergency stop switches Type HEN 211 must only be used in control electrical circuits. Taking into consideration the safety data and maintenance recommendations, the pull-rope emergency stop switch type HEN 211 can be used in safety circuits in accordance with DIN EN ISO 13849 up to Performance Level e (PLe).

Contact configuration:

• 2NC for safety circuit (positive-break contacts)
• 1NO for BUS-control only for control circuit