Pull Rope Emergency Stop Switches LRS

Pull Rope Emergency Stop Switches LRS

Make An Enquiry


Pull Rope Emergency Stop Switches LRS

Kiepe pull-rope emergency stop switches type LRS are used in accordance with the requirements of EN 620 as well as BGI 710 and in conformity with DIN EN ISO 13850 as emergency stop devices as supplementary safety measures on conveyor belt systems. The pull rope is tensioned on one side of the actuating shaft. The devices are suitable for indoor use and applications where the ambient temperature varies only in small range. With the pull-rope system functionally aligned, the emergency stop signal can be triggered over a distance of 20 m. Kiepe pull-rope emergency stop switch types LRS comply with Machinery Directive 2006/42/EC. The device must only be used in electrical control circuits.

The LRS aluminum housing offers space for one (1) switching element with different contact configurations for each variant of LRS. Taking into consideration the safety data and maintenance recommendations, the pull-rope emergency stop switch type LRS can be used in safety circuits in accordance with DIN EN ISO 13849
up to Performance Level e (PLe)

LRS 004       2NC / 1NO (positive-break contacts)
LRS 022       2NC / 2NO (positive-break contacts)
LRS 031       3NC / 2NO (positive-break contacts)



There are no reviews yet.

Be the first to review “Pull Rope Emergency Stop Switches LRS”

Pull Rope Emergency Stop Switches LRS Data Sheet